DYAS frame - Frame laths for beds
The initial semi product for frame laths is a layered pressed wood made of beech veneers which are 1,5mm thick. Unlike plywood, nearly all veneers have the same grain flow. By this, a high bending strength is achieved in the grain direction. After being processed, plywood boards are cut into frame laths of requested dimensions. Laths are used for the production of bed frames.
DYAS Frame
is a health harmless wood product complying with the A (E1) Class of formaldehyde escape according to ČSN EN 1084 norm - by the method of gas analysis.
Application:
Dyas Frame is a semi product for bed frames production.
Thickness:
20, 25, 30, 35, 40 mm
(other thicknesses on customers' request)
Width:
from 100 up to 1800 mm
Length:
from 300 up to 2500 mm
The surface of the laths can be:
- raw
- impregnated
- wrapped in film
- with chamfered or rounded edges
Gluing:
Class of gluing 1 (IF 20) - ČSN EN 314-2 - can be used in interior applications according to ČSN EN 636
Quality:
PN 10 - DY / 99 - Frame laths
Sanding:
is ordinarily sanded with grain 60, which is a basic sanding along with calibration
Moisture:
6% to 12% (at the time of delivery)
| Thickness | Number of plies | Approximate volume weight | Thickness tolerance | Bending strength (surface veneer grain orientation) |
|
| (kg/m3) | (mm) | lengthwise | crosswise | ||
| 18 | 13x | 770 | +0,5/-0,5 | 80,0 N/mm2 tested perpendicularly to the edge |
not defined |
| 19 | 13x | ||||
| 20 | 14x/15x | +0,5/-0,7 | |||
| 21 | 15x | +0,7/-0,7 | |||
| 22 | I6x | +1.0/-0.7 | |||
| 25 | I8x | 780 | +1,0/-1,0 | ||
| 30 | 22x/23x | ||||
| 40 | 30x/31x | 790 | |||
Product Sheet:
Declaration of Performance:
Reference:
Certificate CARB II for gluing class 1:
